In-House
Tooling

Materials

Conversion Charts

Online Forms

Quote Request

Bagging

Uni-Screw in Plastic

Track Your Order
 




 Back to VIP Home Page Contact VIP Our Team About VIP Product Catalog New Products Event Calendar
ABS

A polymer consisting of Acrylonitrile, Butadiene and Styrene which can be combined in different ratios to produce a blend tailored to the customer's specific needs. Acrylonitrile contributes heat stability, chemical and aging resistance. Butadiene contributes low
temperature retention, toughness and impact strength. Styrene contributes a glossy finish, rigidity and processing ease. Together, they provide flame retardance, electroplatability and variable gloss finish capability.

Terlux® 2802TR (Methyl Methacrylate) Property Sheet
*  All Values are Nominal.
Physical Value Test
Density-Specific Gravity 1.08 sp gr 23/23 ºC ASTM D792
Melt Flow Rate (220 ºC/10kg) 2.16 g/10 min ASTM D1238
Mold Shrink, Linear Flow 4 to 7 mil/in ASTM D955
Water Absorption @ 24 hrs .35 % ASTM D570
Mechanical Value Test
Tensile Modulus 2.9e+005 psi ASTM D638
Tensile Strength @ Yld 6950 psi ASTM D638
Tensile Elongation @ Brk 4 % ASTM D638
Flexural Strength @ Yld 10150 psi ASTM D790
Impact Value Test
Notched Izod Impact:
(73 ºF)
(-22 ºF)		  
1.3 ft-lb/in
.4 ft-lb/in		 ASTM D256
Thermal Value Test
DTUL @ 264psi - Unannealed 194 ºF ASTM D648
DTUL @ 66psi - Unannealed 201 ºF ASTM D648
Max Continuous Use Temp 164 ºF ASTM D794
Vicat Softening Point 196 ºF ASTM D1525
CLTE, Flow 4e-005 in/in/ºF ASTM D696
Electrical Value Test
Surface Resistivity 1e+013 ohms ASTM D257
Volume Resistivity 1e+015 ohm-cm ASTM D257
Dielectric Strength 2159 V/mil ASTM D149
Dielectric Constant (1e+006 Hz) 2.8 ASTM D150
Dissipation Factor (1e+006 Hz) .014 ASTM D150
Arc Resistance (.1181 in) 150 sec ASTM D495
Ignition Value Test
Flame Rating - UL(.05905 in) HB UL 94
UL 746 Value Test
Rel Temp Index Mech w/o Imp (.05905 in) 140 ºF UL 746
Rel Temp Index Mech w/ Imp (.05905 in) 140 ºF UL 746
Rel Temp Index Elec (.05905 in) 140 ºF UL 746
Comparative Track Index (.1181 in) 600 V UL 746
High Volt Arc Track Rate (.1181 in) .6889 in/min UL 746
Hot Wire Ignition:
(.05905 in)
(.1181 in)		  
22.5 sec
45 sec		 UL 746
High Ampere Arc Ignition (.05905 in) 120 UL 746
Optical Value Test
Transmittance 85% --
** These are typical property values intended only as guides. They should not be used to establish specification limits or as the sole basis of design. Determining whether this information, or this plastic, should be used for a particular application is the responsibility of the user.