In-House
Tooling

Materials

Conversion Charts

Online Forms

Quote Request

Bagging

Uni-Screw in Plastic

Track Your Order
 




 Back to VIP Home Page Contact VIP Our Team About VIP Product Catalog New Products Event Calendar
Nylon

Printer Friendly Version


Nylon resins are typically used in applications requiring heat and chemical resistance, as well as, toughness. Some examples include under-the-hood automotive components, electrical connectors for the telecommunications and computer industries and components of medical devices. Nylon products can be found in virtually every industry. Parts in a broad range of colors can be produced with most nylon resins.

Vydyne® R533H (Polyamide [nylon66]) Property Sheet -- Dry and Cond.
*  All Values are Nominal.
Physical Dry Cond. Test
Density-Specific Gravity 1.4 sp gr 23/23 ºC -- ASTM D792
Mold Shrink, Linear-Flow 4 mil/in -- ASTM D955
Water Absorption @ 24 hrs .7 % -- ASTM D570
Water Absorption @ Equil 1.6 % -- ASTM D570
Mechanical Dry Cond. Test
Tensile Strength @ Yld 28000 psi 20000 psi ASTM D638
Tensile Elongation @ Brk 5 % 6 % ASTM D638
Flexural Modulus 1.35e+006 psi 9e+005 psi ASTM D790
Flexural Strength @ Yld 38000 psi 28000 psi ASTM D790
Compressive Strength 35000 psi 25000 psi ASTM D695
Shear Strength 12500 psi -- ASTM D732
Impact Dry Cond. Test
Notched Izod Impact:
(73ºF, .125 in)
(.25 in)		  
2 ft-lb/in
2 ft/lb/in		  
3.5 ft-lb/in
3.5 ft/lb/in		 ASTM D256
Hardness Dry Cond. Test
Rockwell Hardness:
(M-Scale)		  
 95		  
 80		 ASTM D785
Thermal Dry Cond. Test
DTUL @ 264psi - Unannealed 480 ºF 475 ºF ASTM D648
Melting Point 500 ºF -- --
CLTE, Flow 1.3e-005 in/in/ºF -- ASTM D696
Electrical Dry Cond. Test
Volume Resistivity 1e+015 ohm-cm -- ASTM D257
Dielectric Strength 440 V/mil -- ASTM D149
Dielectric Constant (1000 Hz) 4.5 -- ASTM D150
Dissipation Factor (1000 Hz) .02 -- ASTM D150
Arc Resistance (.125 in) 78 sec -- ASTM D495
Ignition Characteristics Dry Cond. Test
Flame Rating - UL:
(.03125 in)
(.0625 in)
(.125 in)		  
HB
HB
HB		  
--
--
--		 UL 94
Limiting Oxygen Index 28 % -- ASTM D2863
UL 746 Dry Cond. Test
Rel Temp Index Mech w/o Imp:
(.03125 in)
(.0625 in)
(.125 in)		  
257 ºF
257 ºF
257 ºF		  
--
--
--		 UL 746
Rel Temp Index Mech w/ Imp:
(.03125 in)
(.0625 in)
(.125 in)		  
221 ºF
221 ºF
221 ºF		  
--
--
--		 UL 746
Rel Temp Index Elect:
(.03125 in)
(.0625 in)
(.125 in)		  
239 ºF
239 ºF
239 ºF		  
--
--
--		 UL 746
UL 746 (Cont'd) Dry Cond. Test
Comparative Track Index:
(.125 in)		  
385 V		  
--		 UL 746
High Volt Arc Track Rate:
(.03125)
(.0625 in)
(.125 in)		  
.5 in/min
.6 in/min
.5 in/min		  
--
--
--		 UL 746
Hot Wire Ignition:
(.03125 in)
(.0625 in)
(.125 in)		  
  9 sec
16 sec
11 sec		  
--
--
--		 UL 746
High Ampere Arc Ignition:
(.03125 in)
(.0625 in)
(.125 in)		  
200
200
200		  
--
--
--		 UL 746
** These are typical property values intended only as guides. They should not be used to establish specification limits or as the sole basis of design. Determining whether this information, or this plastic, should be used for a particular application is the responsibility of the user.